Chain Cutter BOPP Film Lamination Machine , Automatic Thermal Lamination Machine

Chain Cutter Thermal Film Laminating machine for PET film lamination model SW - 1050GL

SW-1050GL is a model Chain Cutter Thermal Film Laminating machine for PET film lamination.It adopts high speed rotating knife to cut film after lamination.This kind of separation has the feature of low noise,small film raw edge,application for all kind of film,such as BOPP film,PET film,metalized film and etc..Usually PET film is much stronger than BOPP film,for normal penumatic separation,can't separate it.At this kind of suitiation,chain cutter is better choice.Chain cutter can run very stable and accurately without any failure.

Before using the chain cutter, please make sure there is no any problem with the chain cutter.Set the Separation Length and Sheet Width.Set the length and width as correct as possible.Separation length is the sheet length minus sheet overlap.Sheet Width is paper width.Touch Work Switch and switch on servo.Touch Automatic Running. Chain cutter goes back to original point.Turn the button Length Sensor to 1 and open the cylinder in the middle of chain cutter. Turn on the switch Traction roller(Pinch roller) to make the wheel press the roll.

Move the laminated paper and pass through traction roller(Pinch roller).When paper pass through the chain cutter knife, automatic cut. From the third sheet, please adjust deviation value in the touch screen if there is any deviation. Adjust the deviation value until it is in normal.If the sensor any problem, please Please change the Paper Thickness Setting and make sure correct setting.When Chain cutter is working, please decrease the speed and then touch Flying Knife Reset if the knife deviate more than 100mm.After finish the chain cutter job, please turn off Automatic running at first and then turn off Work Switch.

SW-1050GL is used for BOPP PET PVE thermal film. The machine adopts automatic feeding, automatic slitting after lamination, and has stable, high-effective features. Schneider, Omron famous electrical components are used in the machine to ensure the stability and safe. The machine is automatic, feeder is automatic feeding, electromagnetic heaer is used for heating roller to keep the precision of laminating temperature. PLC control system is also used in this machine. It has the advantages of high precise feeding, stable working, long service lift and convenient maintenance. It is suitable to laminate those products like cards, certificates, files, book covers, and packaging boxes etc.

Applications

It suits for pre-coated film.It is widely used for magazines, paper,books, and packs for food, medicine, cosmetics and so on.

Features

SW-1050GL automatic high speed laminator is newly developed for the lamination of pre-glued film

and paper. It is fast and efficient machine, max speed can be reach 120m/min.The machine realizes

complete automation to paper feeding system, separating system ,man-machine interface system, paper collecting

and electromagnetic heater.

The chain cutter system apply for all kinds of thermal film lamination,having the feature of accurate separation without

film margin,especially for PET film, foil film and etc.,with excellent function to solve complicated issue.

Technical Parameters

Model No.:SW-1050GL

Max Paper Size:1050*1200mm

Min Paper Size:350*350mm

Laminating Speed:0-120m/min

Paper Thickness:105-500gsm

Gross Power:25kw

Overall Dimensions:9550*2400*1900mm

Weight:5000kgs

Details of machine